Rotax 914 series Installation Manual

Effectivity: 914 Series
Edition 2 / Rev. 0
d04274
page 15
July 01/2008
BRP-Rotax
INSTALLATION MANUAL
◆ NOTE: The illustrations in this Installation Manual are managed in a graphic
data base and are identified by a consecutive, non-corresponding
number.
This No. (e.g. 00277) does not have any meaning concerning the
content!
All necessary documentation is available from the BRP-Rotax
Distribution and Service Center.
Installation drawings and a DMU-model for (virtual) installation analysis are available
from the ROTAX Authorized Distributors or their Service Centers.
09199
08404
Fig.1

Rotax 914 series Specifications

General

Bore	79.5 mm
Stroke	61 mm
Compression Ratio	9.0:1
Cooling System	Liquid-cooled cylinder heads, air-cooled cylinders
Redline	5800 rpm
Engine Type	4-cylinder, 4-stroke
Fuel Type	Avgas 100LL
Oil System	Dry sump
Fuel System	fuel injection
TBO (Time Between Overhauls)	2000 hours
Displacement	1.211 liters (1211 cc)
Power Output	84.6 kW (115 hp) at 5, 800 rpm