Rotax 914 series Installation Manual

Effectivity: 914 Series
Edition 2 / Rev. 0
d04278
page 79
July 01/2008
BRP-Rotax
INSTALLATION MANUAL
direction of rotation of engine
appropriate plug
pressure.....max. 1 bar
(15 psi)
05446
F
IN
OUT
05448
4
5
2
1
08413
back from
engine (2)
to oil pump (1)
7
6
3
max. 0,5 mm
(0,02 in.)
Fig. 45
Fig. 46
13.12)Replacement of components
If a malfunction of hydraulic valve tappet should be found during this check of priming
process, the relevant hydraulic valve tappet has to be replaced and the valve spring
support has to be inspected for wear.
All work has to be performed in accordance with the relevant Maintenance Manual.

Rotax 914 series Specifications

General

Bore	79.5 mm
Stroke	61 mm
Compression Ratio	9.0:1
Cooling System	Liquid-cooled cylinder heads, air-cooled cylinders
Redline	5800 rpm
Engine Type	4-cylinder, 4-stroke
Fuel Type	Avgas 100LL
Oil System	Dry sump
Fuel System	fuel injection
TBO (Time Between Overhauls)	2000 hours
Displacement	1.211 liters (1211 cc)
Power Output	84.6 kW (115 hp) at 5, 800 rpm