page 58
July 01/2008
Effectivity: 914 Series
Edition 2 / Rev. 0
d04277
INSTALLATION MANUAL
BRP-Rotax
No provision has been made for attachment of the radiator(s) on the engine (rubber
mounts are recommended).
■ CAUTION: Install the radiator without distortion or stressand free of vibrations
(rubber mounts are recommended).
At installation of a non-original ROTAX radiator take care of
sufficient cooling capacity. See section 12.7
To achieve the best possible cooling effect via the venting of the cooler it is
recommended to install a proper elastic sealing as a link to the cowling or to an air
duct.
To Next Page
Loading...
