Roxell FLEX-AUGER FA 75 - Page 165

ROXELL - 031 - 0516
FLEX-AUGER - INSTALLATION INSTRUCTIONS
III-67
TO INSTALL FLEX AUGER II : SEE GENERAL INSTALLATIONS FLEX AUGER
75.
SPECIAL REMARKS :
FIGURE 133.
1. Maximum inclination of FA II : 30
2. Intake boot
3. Power unit
Always put the flow regulator on Minimum feed flow.
Only 1 one power unit type !
MAX. 30_
FIGURE 134.
=FLOWREGULATOR
CLOSED
Flow regulator
THE MOTOR IS STANDARD IN TRIANGLE !
DO NOT CHANGE THIS !!!