FLEX-AUGER - INSTRUCTIONS FOR THE USER
ROXELL - 031- 0516
I-11
WHEN YOU DO NOT WANT TO MIX
WHEN YOU WANT TO MIX
+
The bin selector is switched off here.
! Attention: when a bin is empty, the system keeps on working and feed II will be fed for 100%.
The system st ops as soon as the bin is empty .
1. When there is only 1 bin for feed I (with minimum sensor) :
BIN CHOICE.
Dependingonthebinyouareusing.
FIGURE 4.
The system stops as soon as the bin is empty.
2. When you use two bins with m inimum sensor for feed I.
3. When you don't use minimum sensors for bin(s) feed I.
Put bin selector always at I.
To Next Page
Loading...
