26 •
5. OPERATION
5.1 Switching system on/off
Switching on
1. Ensure that the measuring mat is correctly suspended in the storage
compartment of the monitor ➔ Suspending measuring mat in storage
compartment.
2. Press the ON/OFF button of the monitor.
The LED of the ON/OFF button is white.
The internal PC boots up. This takes several seconds.
The login window is displayed.
The measuring mat switches on automatically.
3. Log in as described in the section entitled ➔ Logging in.
➔ Switching system on/off
➔ Preparing seca patient file
➔ Measurement
➔ Evaluating the measurement
➔ Switching on
➔ Logging in
➔ Logging out/switching user
➔ Automatic standby
➔ Switching the monitor to standby
➔ Switching off
To Next Page
