2.5 Setting units of measurement
CAUTION!
Patient hazard
In order to avoid misinterpretations, test results for medical use must
be displayed and used in SI units (weight: kilogrammes, length:
metres) only. Some devices offer the ability to display test results in
other units. This is only an additional function.
► Use the results exclusively in SI units.
► The use of measurement results in non-SI units is the sole respon-
sibility of the user.
1. Press the
units tab.
2. Make the desired settings.
► Specify the reference for resting energy expenditure
► Specify the unit for energy
► Specify the decimal separator
► Specify the unit for weight
► Specify the unit for height
NOTE:
Settings you make in this tab are active directly. You do not need to
save or confirm them.
To Next Page
Loading...
