Seca 525 - Setting up PC Connection Manually

Data connection • 71
English
Setting up PC connection manually 1. Press the PC softw. tab.
2. Press the
Link active checkbox.
The function is activated.
3. Deactivate the
Connect via UDP checkbox.
4. In the Communication Server IP line, enter the appropriate IP address.
5. In the
TCP Port line enter the value of the PC selected under 4.,
(Default: 20010).
NOTE:
Settings you make in this tab are active directly. You do not need to
save or confirm them.
Configuration IP address
seca 115 PC software as a
client/server solution
The IP address of the PC on which
the seca 115 PC software was
installed with the options
Server or
Complete
seca 115
PC software as a
standalone solution
IP address of the PC workstation