2. Press the button.
All measurements for the current patient are displayed.
The latest measurement is highlighted automatically.
You have the following navigation options.
► Press the checkboxes : select values for history: continue
with Step 3.
► Press the button: add a comment.
► Press the button: return to the evaluation of the current
measurement.
NOTE:
Just a single comment can be added to each measured result. Exist-
ing comments will be overwritten.
3. Press the checkboxes for all the values you want to look at in the
history.
4. Press the button.
The history will be displayed.
To Next Page
Loading...
