23
Working with the Fire Alarm Control Panel and the Configurator
2.8.1 Getting Configuration Information from the Configurator
To get configuration information from the Configurator
1. In the Configurator, click Panel > Connect.
2. Click Panel > Panel Information.
The Panel Information window appears.
Figure 12 Panel Information
3. Click Advanced.
The Advanced Panel Information window appears.
Job Name The name of the job that is currently active on the FACP.
Version The version number of the job that is currently active on the FACP.
Date The date and time when the job was sent to the FACP.
ESD The ESD (Electronic Systems Distributor) number of the organization
that sent the job. Each organization has a unique ESD number, so
that one organization cannot modify systems that another
organization has configured.
Technician The number of the technician who sent the job.
Config The version of the Configurator that sent the job to the FACP.
Last changed The date and time the FACP was last changed.
Panel Time The date and time on the FACP.
To Next Page
Loading...
Need help?
General
