| 4 - Instruction manual
2 Analog Out 3-pin socket
• Analog audio output (see Connecting the receiver)
• passend für Phoenix Contact MCVW 1.5-3-ST-3.81
3 Reset button
• To restore the factory settings
• Hold for 5 seconds
4 Dante I / PoE / Ctrl RJ-45 socket
• Digital audio output (see Connecting the receiver)
• PoE supply (Power over Ethernet) (Power over Ethernet) (see Putting the
receiver into operation)
• Configuration via the Sennheiser Control Cockpit or a media control
systemg (see Controlling and monitoring the receiver via the network)
5 Dante II RJ-45 socket
• Digital audio output (see Connecting the receiver)
100
To Next Page
Loading...
