| 4 - Instruction manual
Pairing a receiver with a transmitter
To establish a new radio link between a receiver and a transmitter, proceed as follows:
The SL Rack Receciver DW
▷ Long-press the PAIR button of the receiver until its status LED flashes alternately
green and red.
Or
▷ Press the Pair button of the desired device from the device list in the Control
Cockpit.
➥ First Identify appears on the display panel of the receiver. The Pairing message
then appears.
Any existing radio link is now disconnected.
You now have 90 seconds to establish a radio link with a new transmitter.
186
To Next Page
Loading...
