| 3 - System planning
Option 2: Combining multiple links to one AWM 2/AWM 4
With this variant, you can use passive antenna splitters (SL PASC 2 or SL PASC 4) together
with the AWM 2 or AWM 4 to combine the antenna signals from multiple receivers. This
reduces the number of antenna cables required to a minimum.
Combining up to 2 links using the AWM 2 and the SL PASC 2
The following illustration shows an example of how to combine up to 2 links with one AWM 2
antenna wall mount. This reduces the number of antenna cables required from 4 to 2.
• Please observe the information below on the length of the extension cables (Signal
loss due to extension cables and antenna splitters).
53
To Next Page
Loading...
