| 4 - Instruction manual
Connecting the clip-on microphone or the headset microphone to
the bodypack transmitter
Only connect the clip-on microphone or the headset microphone recommended by
Sennheiser. These microphones are optimized for the bodypack transmitter.
▷ Connect the jack plug of the clip-on microphone or headset microphone to the 3.5
mm jack socket (MIC/LINE) of the bodypack transmitter.
▷ Lock the jack plug by screwing down the coupling ring.
➥ When the jack plug is not firmly locked, crackling noise can appear in the audio
signal.
Alternatively, you can use a 3.5 mm jack cable to connect a line source (e.g. a
smartphone, tablet or laptop) to the bodypack transmitter.
143
To Next Page
Loading...
