| 4 - Instruction manual
The CHG 4N charger
The CHG 4N is a network-compatible charger with four separate charging slots. These
ports can be used for the SL Bodypack DW and the SL Handheld DW. The four LEDs on
each charging slot indicate the current charging status. The versatile network interface is
compatible with IPv4 and IPv6 for seamless integration. The Sennheiser Control Cockpit
software can be used to monitor and remotely control the settings and status messages.
Related information
Product overview
Connecting the charger to the power supply system
Charging the accupack in the charger
Meaning of the charging slot status LEDs
Controlling and monitoring the charger over the network
Connecting the charger to the network
Integrating the charger into a network with DHCP
Integrating the charger into a network without DHCP using Auto IP
Integrating the charger into a network without DHCP using Fixed IP
Connecting a pre-configured charger to the Sennheiser Control Cockpit
Resetting the charger’s network settings
Activating power saving mode
Updating the firmware
Product overview
228
To Next Page
Loading...
