| 4 - Instruction manual
Charging the accupack in the charger
To charge an accupack in the CHG 2 charger:
▷ Insert the transmitter with the accupack installed and with the charging contacts
facing downwards into the charger.
➥ Make sure to insert the transmitter the correct way round: The STANDBY button
of the bodypack transmitter has to point in the direction of the charger's charge
status LED.
The charge status LED lights up red when the accupack is being charged.
The charge status LED lights up green when the accupack is fully charged.
212
To Next Page
Loading...
