| 4 - Instruction manual
Charging the accupack in the charger
To charge an accupack in the CHG 2N charger:
▷ Insert the transmitter with installed accupack into one of the charger’s two charging
slots. Make sure the charging contacts face downward.
▷ Make sure to insert the transmitter the correct way round. The transmitter fits into the
charger in only one direction.
➥ The four charge level LEDs for each of the four charging slots indicate the
accupack’s current charge level, see Meaning of the charging slot status LEDs.
217
To Next Page
Loading...
