| 4 - Instruction manual
Removing/inserting the accupack
The accupack must be charged before the first use. The accupack can either be charged with
the optional CHG 2 or CHG 4N chargers (see The CHG 2N charger or The CHG 4N charger)
or with the supplied USB cable.
To remove the accupack:
▷ Simultaneously press the two unlock buttons and pull the accupack away from the
handheld transmitter.
To insert the accupack:
▷ Slide the accupack onto the handheld transmitter as shown.
➥ The accupack or the battery compartment locks into place with an audible click.
127
To Next Page
Loading...
