| 4 - Instruction manual
The MKE 1 clip-on microphone
The MKE 1 is a high-quality, sub-miniature, sweat-resistant clip-on condenser microphone. It
features excellent sound quality and rugged design. The frequency response curve has been
optimized for stage, studio and reporting applications (ENG).
The MKE 1 is fitted with a very thin (only 1 mm) yet extremely rugged cable, making this
microphone an ideal partner for all live sound applications.
Features
• Sub-miniature microphone
• High maximum sound pressure level
• Wide frequency response with adaptable treble response
• Thin (only 1 mm), flexible and rugged cable, low in handling noise
• Very insensitive to the penetration of sweat due to a special protective “umbrella”
diaphragm
Related information
Treble boost
Attaching the microphone
Connecting the microphone to the SL Bodypack DW
Treble boost
Your microphone is supplied with two different frequency response caps. These caps allow
you to adjust the treble response of the microphone.
In addition, the large frequency response cap attenuates wind noise by approx. 15 dB and
provides an extended protection against the ingress of moisture.
205
To Next Page
Loading...
