| 4 - Instruction manual
Connecting the antenna cables
You can connect one receiver directly to the AWM 2 and two receivers directly to the AWM 4.
▷ Connect the two antenna outputs ANT I and ANT II of the first receiver to the
connections LINK I of the AWM 2 or AWM 4.
▷ Connect the two antenna outputs ANT I and ANT II of the second receiver to the
connections LINK II of the AWM 4.
You can find additional information on possible setups using the AWM 2
and AWM 4 as well as general recommendations on antenna usage under
Recommendations on antenna mounting.
251
To Next Page
Loading...
