| 4 - Instruction manual
Integrating the charger into a network without DHCP using Auto
IP
If there is no DHCP server in the network and you are working with automatically generated
IP addresses, please observe the following information.
▷ Ensure that the host PC on which the Sennheiser Control Cockpit service is installed
is configured so that the IP address is assigned automatically, rather than a static
configuration.
➥ After several minutes, all chargers in the network will receive a link-local address
in the range of 169.254.x.x.
The charger is automatically detected in the Sennheiser Control Cockpit, since the charger is
delivered with mDNS activated by default.
You can deactivate mDNS after you have configured the charger once.
mDNS = multicast Domain Name System: resolves host names to IP addresses
within small networks that do not include a local name server. Used for automatic
device discovery.
Some basic routers with an integrated DHCP server require more time to start. In
this case, the SpeechLine devices may initially receive an automatically assigned
IP. Once a DHCP server is available, however, the IP addresses assigned by the
server will be used.
237
To Next Page
Loading...
