| 4 - Instruction manual
If the result of the walk test is not satisfying, you can take the following remedial measures:
• If possible, reposition the receivers so that there is always a direct line of sight
between the receiver antennas and the paired transmitter.
• If possible, remove obstacles between the transmitter and the receiving antennas.
• When rack mounting receivers, you should mount their rod antenna to the front of the
rack using the GA 4 rack-mount kit.
• If you have manually adjusted the transmission power, you may have to readjust it
via the receiver's operating menu: System Settings -> RF Power. You can find more
information under Multi-room mode.
194
To Next Page
Loading...
