The red element stays on because this is the step being edited.
The result is that when the edited step is the current playlist step, the LED will flash between red and
amber .
At this point, try selecting some other playlist steps for editing.
If you select a step from 3 to 8, you will see that the LED is solid red.
The playlist length is still only 2, so none of the LEDs from 3 to 8 have their green element on.
And they never become the current playlist step.
To summarise the various colours of PLAYLIST STEP LEDs:
LED Colour Meaning
green this step is within the current playlist length
flashing green this step is the current playlist step being played
amber this step is within the current playlist length , and is selected for editing in Edit view
flashing red /
amber
this step is the current playlist step being played, and is selected for editing in Edit
view
red this step is NOT in the current playlist length, but has been selected for editing
*TIP Bein g able to select steps for editing, even though they are not currently part of the playlist,
means you can set up the patterns on these steps exactly as you want before you increase the playlist
length to include them.
To Next Page
Loading...
