2-7
COPIER
Contents
Output settings
Select copy output settings.
The main settings are as follows:
•Sort mode
☞Sort mode (page 2-34)
• Group mode
☞Group mode (page 2-34)
• Offset mode
☞Offset function (page 2-34)
• Staple sort mode
☞Staple sort function (page 2-35)
Special mode settings
Select special modes such as "Margin Shift" and "Erase".
☞ SPECIAL MODES (page 2-39)
Number of copies (sets) setting
Set the number of copies (number of sets).
Start copying.
Start scanning the original(s) and making copies.
Press the [COLOR START] key or the [BLACK & WHITE START] key.
To cancel all settings, press the [CLEAR ALL] key ( ).
When the [CLEAR ALL] key ( ) is pressed, all settings selected to that point are cleared and you will return to the base
screen.
To stop scanning of the original and copying, press the [STOP] key ( ).
When the [STOP] key ( ) is pressed, a message will appear asking you if you want to cancel the job. Select the [Yes] key
in the message screen and press the [OK] key.
7
To Next Page
Loading...
Need help?
General
