5-110
SCANNER/INTERNET FAX
Contents
MANUALLY RECEIVING INTERNET FAXES
If the interval for checking for received faxes is somewhat long and you wish to check immediately, you can manually
initiate reception.
Select the [Manual RX] key to connect to the mail server and retrieve received faxes.
If POP3 server settings are not configured in the Web pages, the [Manual RX] key is grayed out to prevent selection.
System Settings: Fax Data Receive/Forward (page 6-16)
This setting is used to hide the [Manual RX] key that appears in the base screen of Internet Fax mode. When the [Manual
RX] key is hidden, manual reception is initiated by selecting the [Reception Start] key in the screen that appears when "Fax
Data Receive/Forward" - "I-Fax Settings" is selected.
OKBACK
To Next Page
Loading...
