4-56
FACSIMILE
Contents
CHANGING THE EXPOSURE
The exposure can be changed to match the darkness of the original.
Refer to the following tables to select appropriate settings.
Exposure settings
Keys in the display can be selected with the arrow keys and the [OK] key.
Exposure When to select
Auto This setting automatically adjusts the exposure for light and dark parts of the original.
Manual
1-2 Select this setting when the original consists of dark text.
3 Select this setting for a normal original (neither dark nor light).
4-5 Select this setting when the original consists of faint text.
1
Select the [Exposure] key.
The current exposure setting appears in the [Exposure] key.
☞ IMAGE SETTINGS (page 4-47)
2
Select the exposure.
(1) Select the [Manual] key.
(2) Adjust the exposure.
Select the key or the key. To darken the
exposure, select the key. To lighten the exposure,
select the key.
To return to auto exposure adjustment, select the [Auto]
key.
(3) Select the [Basic Menu] key.
When using the document glass to scan multiple original pages, the exposure setting can be changed each time you change
pages. When using the automatic document feeder, the exposure setting cannot be changed once scanning has begun.
(However, when "Job Build" in the special modes is used, the exposure can be changed each time a new set of originals is
inserted.)
System Settings (Administrator): Default Exposure Settings
This is used to change the default exposure setting.
OKBACK
OKBACK
(1)
(2) (3)
To Next Page
Loading...
Need help?
General
