5-107
SCANNER/INTERNET FAX
Contents
GIVING PRIORITY TO A SCAN
TRANSMISSION JOB
When multiple jobs are waiting to be transmitted, the jobs are normally transmitted in the order they were reserved. If
you need to give priority to a job and send it ahead of the other jobs, follow the steps below.
Keys in the display can be selected with the arrow keys and the [OK] key.
1
Press the [JOB STATUS] key.
2
Select the job to which you wish to give
priority.
(1) Switch to the mode of the job to be given
priority.
Select either of the keys with the keys
and press the [OK] key. The mode changes each time the
[OK] key is pressed.
(2) Select the job to be given priority.
(3) Select [Priority] in the displayed screen.
The selected job moves up to the position immediately
following the job in progress. The job will be executed
when the job in progress is completed.
JOB STATU
OKBACK
AAA AAA
BBB BBB
CCC CCC
DDD DDD
EEE EEE
Broadcast
(1)
(2)
To Next Page
Loading...
Need help?
General
