5-49
SCANNER/INTERNET FAX
Contents
CHANGING THE SUBJECT, FILE NAME, AND BODY
TEXT
The subject, file name, and body text can be changed when performing an Internet fax transmission. Preset items can
be selected or text can be directly entered.
Keys in the display can be selected with the arrow keys and the [OK] key.
• If the subject and file name are not changed, the settings in the Web page are used.
• Selections for the subject, file name, and body text are configured by clicking [Application Settings] and then [Network
Scanner Settings] in the Web page menu.
• For the procedure for entering text, see "ENTERING TEXT" (page 1-61) in "1. BEFORE USING THE MACHINE".
1
Select the [Send Settings] key in the base screen.
☞
BASE SCREENS (page 5-13)
2
To change the subject, select the
[Subject] key.
3
Enter the subject.
(1) Select a pre-set text key.
(2) Select the [OK] key.
• If you wish to directly enter the text, select the [Direct Entry] key and press the [OK] key. A text entry screen will
open. Enter the text and press the [OK] key.
• To edit pre-set text, select the pre-set text, select the [Direct Entry] key, and press the [OK] key. The text entry
screen will appear with the selected pre-set text entered. (When a destination is stored using the Web page, up to
80 characters can be entered. However, only 54 characters can be entered in the display.)
OKBACK
OKBACK
(1) (2)
To Next Page
Loading...
Need help?
General
