4-79
FACSIMILE
Contents
SENDING BUSINESS CARDS
(Business Card Scan)
Multiple business cards can be scanned and transmitted at once.
To use this function, the business card feeder must be attached to the automatic document feeder and "Business Card
Scan Option" must be enabled in the system settings (administrator). For the attachment procedure, see "BUSINESS
CARD FEEDER" in "BEFORE USING THE MACHINE" (page 1-57).
Keys in the display can be selected with the arrow keys and the [OK] key.
1
Load the business cards.
2
Enter the destination fax number.
☞
ENTERING DESTINATIONS (page 4-19)
3
Select the special modes.
(1) Select the [Special Modes] key.
(2) Select the [Bus. Card Scan] key.
Read the message that appears and then press the [OK] key.
☞ SPECIAL MODES (page 4-69)
4
Press the [BLACK & WHITE START] key.
Scanning begins. A beep will sound to indicate that scanning is finished.
To cancel scanning...
Press the [STOP] key ( ).
This function cannot be used when the scan size is specified by numerical values.
System Settings (Administrator): Business Card Scan Option (Web page only)
Specify whether or not the business card scan function is used.
To Next Page
Loading...
Need help?
General
