4-47
FACSIMILE
Contents
IMAGE SETTINGS
Settings for scanning the original are selected in the base screen of each mode. The current state of each setting
appears in the key used to select the setting.
(1) [Scan Size] key
Select this key to set the scan size, and orientation of the
original, and select 2-sided scanning settings.
☞ AUTOMATICALLY SCANNING BOTH SIDES OF
AN ORIGINAL (2-Sided Original) (page 4-48),
SPECIFYING THE SCAN SIZE AND SEND SIZE
(page 4-50)
(2) [Send Size] key
Select this key to specify the send size of the original.
(3) [Exposure] key
Select this key to select the exposure for scanning.
☞ CHANGING THE EXPOSURE (page 4-56)
(4) [Resolution] key
Select this key to select the scanning resolution.
☞ CHANGING THE RESOLUTION (page 4-57)
OKBACK
(1)
(2)
(3)
(4)
To Next Page
Loading...
