Sharp DX-C310 User Manual

2-3
COPIER
Contents
This section provides information that you should know before using the machine as a copier.
BASE SCREEN OF COPY MODE
Press the [COPY] key on the operation panel to open the base screen of copy mode.
The base screen shows messages and keys necessary for copying, and settings that have been selected.
(1) [Original] key
Select this key to specify the original size.
If the original size displayed in this key is different from
the size of the original you placed, or if the original size is
not displayed, be sure to select this key and specify the
correct size.
☞ ORIGINAL SIZES (page 2-28)
(2) [Paper Select] key
Select this key to change the paper (tray) that is used.
The tray, paper size, and paper type will appear.
☞ PAPER TRAYS (page 2-9)
(3) [Exposure] key
This shows the current copy exposure and original type
settings. Select this key to change the exposure or
original type setting.
☞ CHANGING THE EXPOSURE AND ORIGINAL
IMAGE TYPE (page 2-23)
(4) [Copy Ratio] key
This shows the current copy ratio. Select this key to
adjust the copy ratio.
☞ REDUCTION/ENLARGEMENT/ZOOM (page 2-25)
(5) [Color Mode] key
Select this key to change the color mode.
☞ COLOR COPY MODES (page 2-21)
(6) [2-Sided Copy] key
Select this key to select the 2-sided copying function.
☞ AUTOMATIC 2-SIDED COPYING (page 2-15)
(7) [Output] key
Select this key to select an output function such as sort,
group, offset, or staple sort.
☞ OUTPUT (page 2-33)
(8) [Special Modes] key
Select this key to select special modes such as Margin
Shift and Edge Erase.
☞ SPECIAL MODES (page 2-39)
BEFORE USING THE MACHINE AS A
COPIER
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(11)(10) (12)(9)

Sharp DX-C310 Specifications

General

Brand	Sharp
Model	DX-C310
Category	Copier
Language	English