Sharp DX-C310 User Manual

2-31
COPIER
Contents
3
Enter the original size.
(1) Enter the X (horizontal) dimension of the
original.
Select either of the keys with the keys and
press the [OK] key repeatedly to change the number.
A dimension from 1" to 14" (25 mm to 356 mm) can be
entered.
(2) Enter the Y (vertical) dimension of the
original.
Select either of the keys with the keys and
press the [OK] key repeatedly to change the number.
A dimension from 1" to 8-1/2" (25 mm to 216 mm) can be
entered.
(3) Select the [Basic Menu] key.
The stored original size will be retained even if the main power is turned off.
To cancel the operation...
Press the [CLEAR ALL] key ( ).
OKBACK
(3)
(1) (2)

Sharp DX-C310 Specifications

General

Brand	Sharp
Model	DX-C310
Category	Copier
Language	English