4-8
FACSIMILE
Contents
BASE SCREEN OF FAX MODE
This screen is used to select settings and operations in fax mode.
(1) This shows various messages and the destinations
that have been entered.
The icon on the left indicates fax mode.
(2) [Mode Switch] key
Use these keys to change the mode of the image send
function.
Modes that cannot be used because the appropriate
options are not installed do not appear.
☞ BASE SCREEN OF FAX MODE (page 4-7)
(3) [Quick] key
Select this key to dial a fax destination using a search
number.
☞ USING A SEARCH NUMBER TO RETRIEVE A
DESTINATION (page 4-23)
(4) [Address] key
Select this key to dial using a one-touch key or group
key.
☞ RETRIEVING A FAX NUMBER FROM THE
ADDRESS BOOK (page 4-20)
(5) [Scan Size] key
Select this key to select the image settings (original size,
duplex setup, image orientation).
☞ IMAGE SETTINGS (page 4-47)
(6) [Send Size] key
Select this key to specify the send size of the original.
☞ Specifying the send size of the original (page 4-54)
(7) [Exposure] key
Select this key to select the exposure for scanning.
☞ CHANGING THE EXPOSURE (page 4-56)
(8) [Resolution] key
Select this key to select the scanning resolution.
☞ CHANGING THE RESOLUTION (page 4-57)
(9) [Special Modes] key
Select this key to use a special mode.
☞ SPECIAL MODES (page 4-69)
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(15)
(14)
To Next Page
Loading...
Need help?
General
