Sharp DX-C310 User Manual

1-8
BEFORE USING THE MACHINE
Contents
(12) [CLEAR] key ( )
Press this key to return the number of copies to "0".
(13) [BLACK & WHITE START] key
Press this key to copy or scan an original in black and
white. This key is also used to send a fax in fax mode.
(14) [COLOR START] key
Press this key to copy or scan an original in color.
This key cannot be used for fax or Internet fax.
(15) [LOGOUT] key ( )
Press this key to log out after you have logged in and
used the machine. When using the fax function, this key
can also be pressed to send tone signals on a pulse dial
line.
☞ USER AUTHENTICATION (page 1-17)
(16) [#/P] key ( )
When using the copy function, press this key to use a job
program. When using the fax function, this key can be
used when dialing.
(17) [CLEAR ALL] key ( )
Press this key to return to the initial operation state.
Use this key when you wish to cancel all settings that
have been selected and start operation from the initial
state.
(18) [STOP] key ( )
Press this key to stop a copy job or scanning of an
original.
(19) [POWER SAVE] key ( ) / indicator
Use this key to put the machine into auto power shut-off
mode to save energy.
The [POWER SAVE] key ( ) blinks when the machine
is in auto power shut-off mode.
☞ [POWER SAVE] KEY (page 1-15)
(20) [POWER] key ( )
Use this key to turn the machine power on and off.
☞ TURNING THE POWER ON AND OFF (page 1-14)
(21) Main power indicator
This lights up when the machine's main power switch is
in the "on" position.
☞ TURNING THE POWER ON AND OFF (page 1-14)
LOGOUT
COPY
PRINT OKBACK
JOB STATUS
SYSTEM
SETTINGS
IMAGE SEND
READY
DATA
DATA
LINE
(12) (13) (14)
(17)(15) (16) (18) (20) (21)(19)
The indicators of the operation panel may differ depending on the country and region.

Sharp DX-C310 Specifications

General

Brand	Sharp
Model	DX-C310
Category	Copier
Language	English