Sharp DX-C310 User Manual

5-63
SCANNER/INTERNET FAX
Contents
Specifying the original scan size (by numerical values)
When scanning a non-standard size original such as a card, follow these steps to specify the original size.
Keys in the display can be selected with the arrow keys and the [OK] key.
1
Change the mode and display the scan size setting screen.
(1) Select the [Mode Switch] key.
(2) Select the mode that you wish to use.
(3) Select the [Scan Size] key.
The original size set in the system settings appears in the [Scan Size] key.
☞ IMAGE SETTINGS (page 5-58)
2
Select the [Scan Size] key.
3
Select the [Size Input] key.
OKBACK
OKBACK

Sharp DX-C310 Specifications

General

Brand	Sharp
Model	DX-C310
Category	Copier
Language	English