6-100
SYSTEM SETTINGS
Contents
OPERATION PANEL - FAX (ADMINISTRATOR)
îš‹ Transaction Report Print Select Setting
6-102
• Single Sending Print Out Error Report Only
• Broadcasting Print Out All Report
• Receiving No Printed Report
• Confidential Reception Print Out Notice Page
îš‹ Activity Report Print Select Setting
6-102• Auto Print at Memory Full Disabled
• Print Daily at Designated Time Disabled
îš‹ ECM Enabled 6-102
îš‹ Distinctive Ring Detection Off 6-102
X Fax Send Settings 6-103
îš‹ Rotation Sending Setting All Enabled 6-103
îš‹ Quick On Line Sending Enabled 6-103
îš‹ Printing Page Number at Receiver Enabled 6-103
îš‹ Date/Own Number Print Position Setting Outside the Original Image 6-103
îš‹ Recall in Case of Line Busy Recall, Number of Times: 2,
Interval: 3 min.
6-103
îš‹ Recall in Case of Communication Error Recall, Number of Times: 1,
Interval: 3 min.
6-103
îš‹ Initial Transmission Speed Setting 33.6kbps 6-103
X Fax Receive Settings 6-104
îš‹ Number of Calls in Auto Reception 2 6-104
îš‹ Duplex Reception Setting Disabled 6-104
îš‹ Print Style Setting Auto Size Select 6-104
 Set the Telephone Number for Data Forwarding – 6-104
îš‹ Receiving Date & Time Print Disabled 6-104
îš‹ Fax Output Settings Varies depending on the machine
configuration
6-104
îš‹ Initial Reception Speed Setting 33.6kbps 6-105
X Allow/Reject Number Setting All disabled 6-105
X Fax Polling Security Enabled 6-105
Item Factory default setting Page
To Next Page
Loading...
Need help?
General
