Sharp MX-2314N - Page 165

MX-3114N SIMULATION 6 – 32
26-8
Purpose
Setting
Function (Purpose)
Counter mode setting (Long scale)
Section
Operation/Procedure
1) Select a setting item with the scroll key.
2) Enter the set value with 10-key.
1 = 1 count up, 2 = 2 count up
3) Press [OK] key.
Long Scale (Small) : 631 - 1050mm
Long Scale (Large) : 1631 - 1200mm
26-10
Purpose
Setting
Function (Purpose)
Used to set the trial mode of the network
scanner.
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
26-18
Purpose
Setting
Function (Purpose)
Used to set Disable/Enable of the toner
save mode operation.
(For the Japan and the UK versions.)
Section
Operation/Procedure
1) Select an item to be set with scroll keys.
2) Enter the set value with 10-key.
3) Press [OK] key.
The set value in step 2) is saved.
26-30
Purpose
Setting
Function (Purpose)
Used to set the operation mode corre-
sponding to the CE mark (Europe safety
standards). (For slow start to drive the fus-
ing heater lamp)
Section
Operation/Procedure
1) Enter the set value with 10-key.
2) Press [OK] key.
The set value in step 1) is saved.
* Even in Enable state, the control may not be executed due
to the power frequency, etc.
26-32
Purpose
Setting
Function (Purpose)
Used to set the specifications of the fusing
cleaning operation.
Section
Fusing
Operation/Procedure
1) Enter the set value with 10-key.
Enable/Disable of the user fusing cleaning function is set.
2) Press [OK] key.
Item/Display Content
Setting
range
Default
value
Default
value
(Taiwan)
ATOTAL(B/W)
LONG
SIZE(S)
Long scale (Small)
Total counter (B/W)
1 - 10 3 2
BTOTAL
(COL) LONG
SIZE(S)
Long scale (Small)
Total counter (Color)
1 - 10 3 2
CMAINTE
(B/W) LONG
SIZE(S)
Long scale (Small)
Maintenance
counter (B/W)
1 - 10 3 2
DMAINTE
(COL) LONG
SIZE(S)
Long scale (Small)
Maintenance
counter (Color)
1 - 10 3 2
E DEV(B/W)
LONG
SIZE(S)
Long scale (Small)
Developer counter
(B/W)
1 - 10 3 2
F DEV(COL)
LONG
SIZE(S)
Long scale (Small)
Developer counter
(color)
1 - 10 3 2
GTOTAL(B/W)
LONG
SIZE(L)
Long scale (Large)
Total counter (B/W)
1 - 10 5 2
HTOTAL
(COL) LONG
SIZE(L)
Long scale (Large)
Total counter (Color)
1 - 10 5 2
IMAINTE
(B/W) LONG
SIZE(L)
Long scale (Large)
Maintenance
counter (B/W)
1 - 10 5 2
JMAINTE
(COL) LONG
SIZE(L)
Long scale (Large)
Maintenance
counter (Color)
1 - 10 5 2
K DEV(B/W)
LONG
SIZE(L)
Long scale (Large)
Developer counter
(B/W)
1 - 10 5 2
L DEV(COL)
LONG
SIZE(L)
Long scale (Large)
Developer counter
(color)
1 - 10 5 2
TRIAL MODE
(0: YES 1: NO)
0 Trial mode setting
1 Trial mode cancel (Default)
Item Display Content
Default
value
A COPY 0 Copy toner save mode is inhibited.
0
1 Copy toner save mode is allowed
B PRINTER 0 Printer toner save mode is inhibited.
0
1 Printer toner save mode is allowed.
0 Control allowed
1 Control inhibited
U.S.A 1 (CE not supported) EUROPE 0 (CE supported)
CANADA 1 (CE not supported) U.K. 0 (CE supported)
INCH 1 (CE not supported) AUS. 0 (CE supported)
JAPAN 1 (CE not supported) AB_A 0 (CE supported)
AB_B 1 (CE not supported) CHINA 0 (CE supported)
Item/Display Content Setting range
Default
value
ACLEANIN
G PRINT
SET
User fusing cleaning
function is Enable.
0 YES 0(YES)
User fusing cleaning
function is Disable.
1NO