Sharp MX-2314N - Page 177

MX-3114N SIMULATION 6 – 44
43
43-1
Purpose
Setting
Function (Purpose)
Used to set the fusing temperature in each
mode.
Section
Operation/Procedure
1) Select the SW-A or the SW-B. .
2) Select an item to be set with scroll keys.
3) Select an item to be set with displayed value.
The set value in step 3) is saved.
List of destination groups
Display Content Setting
range
Default
value
PLAIN PAP & WUP & RDY GR The fusing temperature setting of plain paper, Warm-up, and Ready condition
-10
0
-5
0
+5
+10
HEAVY PAPER GR The fusing temperature setting of heavy paper
-10
0
-5
0
+5
+10
THIN PAPER GR The fusing temperature setting of thin paper
-10
0
-5
0
+5
+10
RECYCLED PAPER GR The fusing temperature setting of recycled paper
-10
0
-5
0
+5
+10
GLOSS PAPER GR The fusing temperature setting of gloss paper
-10
0
-5
0
+5
+10
ENV PAPER GR The fusing temperature setting of envelope
-10
0
-5
0
+5
+10
PAP CURL IMPROVEMENT The fusing temperature setting of paper curl improvement
0
0
1
2
3
4
SW-A Setting value when plain paper is selected in the system setting/device setting/fusing control setting.
SW-B Set value when heavy paper is selected in the system setting/device setting/fusing control setting.
The set value displayed in this simulation differs depending on plain paper or heavy paper which is selected in the system setting/device setting/fusing
control setting.
(Example) When plain paper is selected in the system setting/device setting/fusing control setting, the value of SW-A is displayed.
Group Destination
Group AJAPAN–––––
Group B U. S. A CANADA INCH – – –
Group C EUROPE U. K AUS. AB_A AB_B CHINA