Sharp MX-2314N - Page 94

MX-3114N ADJUSTMENTS AND SETTINGS 5 – 45
*1: Text Printed Photo / Copy document, Text Printed Photo only
*2: Printer RGB save  FAX resend only
*3: Printer RGB save only
*4: Only the watermark is related.
46-41 FAX send image density adjustment
(Normal text mode)
--------  -
46-42 FAX send image density adjustment
(Fine text mode)
--------  -
46-43 FAX send image density adjustment
(Super fine mode)
--------  -
46-44 FAX send image density adjustment
(Ultra fine mode)
--------  -
46-45 FAX send image density adjustment
(600dpi mode)
--------  -
46-47 Copy image, image send image, FAX send
image (JPEG) compression ratio setting
(Normally unnecessary to the setting
change)
   (*3)  (*3)
46-51 Gamma manual adjustment for the copy
mode heavy paper and the image process
mode (dither) (No need to adjust normally)
 ---- - -
46-52 Gamma default setting for the copy mode
heavy paper and the image process mode
(dither)
 ---- -  (*4)
46-54 Copy gamma, color balance adjustment for
each dither (Automatic adjustment) (No
need to adjust normally)
 ---- -  (*4)
46-58 Pseudo resolution UP function setting  ---- - -
46-59 Pseudo resolution UP function adjustment  ---- - 
46-60 Color (Copy/Scan) mode sharpness
adjustment (No need to adjust normally)

(1 copy)
-- --- - 
46-61 Area separation recognition level
adjustment (No need to adjust normally)
 (*1)  (*1)  (*1)  (*1) - -
46-62 ACS, area separation, background image
process, automatic exposure mode
operation conditions setting (Normally
unnecessary to the setting change)
  --
46-63 Copy/Scan low density image density
adjustment (for each mode)
(No need to adjust normally)
  --
46-65 Color correction table setting  ------ - 
46-74 Printer/Copy color balance and density
adjustment (Automatic adjustment)
(Basic adjustment)
 ---- - 
Copy MODE IMAGE SEND(SCAN) MODE
Color mode
Monochrome
mode
Color mode
Monochrome
mode
Auto Manual Auto Manual Auto Manual Auto Manual FAX Printer