5-54
SCANNER/INTERNET FAX►TRANSMITTING AN IMAGE
4
To enable OCR, select the [OCR] checkbox ( ) and tap [OCR Setting].
After the settings are completed, tap ( ).
• Select the scanning language in the language settings.
• When [RTF], [DOCX], [XLSX], or [PPTX] is selected for the file format, you can set the font of the output text.
• When the [Detect Original Direction] checkbox is selected ( ), the orientation of the original is detected and the
image is rotated before transmission.
• When the [File Name Auto Extraction] checkbox is selected ( ), the text string that is read from the file is included in
the file name.
5
To select more detailed settings, tap the [Detail] key to switch to normal mode.
► Changing mode from each mode (page 5-9)
6
Tap the [File Format] key.
7
Tap the [Color/Grayscale] or [B/W] tab and select the format mode for
scanning.
• The format setting for [B/W] mode is the file format with the color mode set to [Mono2].
• The format setting for [Color/Grayscale] mode is the file format with the color mode set to [Full Color] or [Grayscale].
To Next Page
Loading...
