7-14
SYSTEM SETTINGS►USER CONTROL
Scan Settings
• Disable Registration of Memory Box All Invalid No Yes
• Disable Destination Registration Using Global
Address Search
All Invalid
No Yes
• Disable Registration Using Network Scanner Tool Disabled No Yes
• Disabling of Forwarding via Network Disabled No Yes
Settings to Disable Transmission No Yes
• Disable [Resend] on Image Send Mode Disabled No Yes
• Disable Selection from Address Book All Invalid No Yes
• Disable Direct Entry All Invalid No Yes
• Disable PC-I-Fax Transmission Disabled No Yes
• Disable PC-Fax Transmission Disabled No Yes
X Own Name and Destination Set No Yes
Sender Data Registration No Yes
• Set I-Fax Own Name – No Yes
• Sender Data Registration (Line2) – No Yes
• Sender Data Registration (Line3) – No Yes
• I-Fax Own Address – No Yes
Registration of Own Name Select – No Yes
• Letter Size RX Reduce Print Disabled No Yes
• Receiving Date & Time Print Disabled No Yes
• POP3 Communication Timeout 60sec. No Yes
• Reception Check Interval Setting 5 minutes No Yes
• I-Fax Output Setting Varies depending on the machine
configuration
No Yes
• Varies depending on the machine configuration – No Yes
- Staple Settings – No Yes
Allow/Reject Mail or Domain Name Setting No Yes
• Allow/Reject Mail or Domain Name Setting All Invalid No Yes
Setup Items Factory default setting U A
● Scan Settings (page 7-92)
X Scan Settings No Yes
Initial Status Settings No Yes
• Default Colour Mode Settings No Yes
- Scanner Common
+ (No item) Auto No Yes
+ (No item) Greyscale No Yes
Setup Items Factory default setting U A
To Next Page
Loading...
