Table of contents
4.1.5 Operation flow charts for parameter setting mode with DU01 .............................................................. 45
4.2 Basic Operation Procedures for Different Modes.................................................................................. 47
4.2.1 Basic operation procedures for PU mode (P.79=0 or 1) ........................................................................ 47
4.2.2 Basic operation procedures for external mode (P.79=0 or 2) ............................................................... 47
4.2.3 Basic operation procedures for JOG mode (P.79=0 or 1) ..................................................................... 48
4.2.4 Basic operation procedures for communication mode (P.79=0 or 2) ................................................... 48
4.2.5 Basic operation procedures for combined mode 1 (P.79=4) ................................................................. 49
4.2.6 Basic operation procedures for combined mode 2 (P.79=5) ................................................................. 49
4.2.7 Basic operation procedures for combined mode 3 (P.79=6) ................................................................. 50
4.2.8 Basic operation procedures for combined mode 4 (P.79=7) ................................................................. 50
4.2.9 Basic operation procedures for combined mode 5 (P.79=8) ................................................................. 50
4.3 Operation ............................................................................................................................................ 51
4.3.1 Pre-operation checks and preparation.................................................................................................... 51
4.3.2 Operation methods ................................................................................................................................... 51
4.3.3 Trial run ..................................................................................................................................................... 52
5. PARAMETER DESCRIPTION................................................................................................................... 53
5.1 Torque Boost (P.0, P.46) ...................................................................................................................... 56
5.2 The Rage of the Output Frequency (P.1, P.2 and P.18) ......................................................................... 57
5.3 Base Frequency and Base Frequency Voltage (P.3, P.19 and P.47)...................................................... 58
5.4 Multi-speed (P.4~P.6, P.24~P.27 and P.142~P.149) .............................................................................. 59
5.5 Acceleration / Deceleration Time (P.7, P.8, P.20, P.21,P.44 and P.45).................................................... 60
5.6 Electronic Thermal Relay Capacity (P.9) .............................................................................................. 62
5.7 DC Injection Brake (P.10, P.11 and P.12) .............................................................................................. 63
5.8 Starting Frequency (P.13) .................................................................................................................... 64
5.9 Load Pattern Selection (P.14, P.98~P.99, P.162~P.169) ........................................................................ 64
5.10 JOG Mode (P.15 and P.16) ................................................................................................................ 67
5.11 Stall Prevention (P.22, P.23 and P.66, P.220) ...................................................................................... 67
5.12 Output Frequency Filter Constant (P.28) ............................................................................................ 69
5.13 Acceleration / Deceleration Curve (P.29, P.255~P.258) ....................................................................... 69
5.14 Regenerative Brake (P.30 and P.70) .................................................................................................. 73
5.15 Carrier Operation Selection(P. 31) V/F.............................................................................................. 74
5.16 Communication Function(P.32, P.33, P.36, P.48~P.53, P.153 and P.154) ............................................. 74
5.17 Communication mode operating instruction and speed instruction selection(P.35) .............................. 95
5.18 Speed Display (P.37, P.259) ............................................................................................................... 95
5.19 Function Selection of HDI Terminal and Analog Terminal (P.500, P.501, P.502, P.503) ........................ 96
5.20 The Voltage Signal Selection across Terminal 2-5 and Target Frequency (P.38, P.73) ......................... 97
5.21 The Input Signal Selection across Terminal 4-5 and the Target Frequency (P.17, P.39) ....................... 99
5.22 The Voltage Signal Selection across Terminal 1-5 and the Target Frequency(P.509, P.530) .............. 101
5.23Multi-function Output (P.40, P.85, P.120, P.129, P.130) ...................................................................... 102
5.24 Up-to-frequency Sensitivity (P.41) .................................................................................................... 104
5.25 Output Frequency Detection (P.42 and P.43) .................................................................................... 104
5.26 AM1/HDO Terminal (P.54~P.56, P.64, P.74, P.187, P.190 and P.191) ................................................ 105
5.27 AM2 Terminal (P.535 ~ P.538) .......................................................................................................... 109
5.28 Restart Function (P.57, P.58, P.150 and P.160)................................................................................. 109
5.29 Input Signal Filter Constant (P.60, P.528, P.529)............................................................................... 111
To Next Page
Loading...
Need help?
General
