MTP-200 Series User’s Manual
Shineway Technologies, Inc. - 71 -
Print OTDR report:
1. Connect USB printer to MTP-200.
For first printing, please first configure printer, please refer to 2.7 Printer
Configuration.
2. Click [ ] button in OTDR main interface and printing dialog window
will pop up.
Fig. 14.3 Printing dialog window
3. Choose the traces to be printed:
A. To print current file, please check “Print current file” option and only one
trace will be printed.
B. To print unopened traces saved in MTP-200, please check “Batch print”
option which support up to 8-traces printing.
4. Print Option:
User can customize OTDR report by clicking [Option] button on printing dialog
window to specify the contents to be printed.
To Next Page
Loading...
