ShinewayTech MTP-200 Series - Page 9

MTP-200 Series User’s Manual
Shineway Technologies, Inc. - ix -
9.2 OTDR test parameters Configuration .......................................................................... 34
9.3 OTDR display and other Configuration ...................................................................... 35
9.4 Real time and average test mode ................................................................................. 35
9.5 Range Configuration ................................................................................................... 36
9.6 Pulse Width Configuration .......................................................................................... 36
9.7 Averaging Time Configuration .................................................................................... 37
9.8 Laser Wavelength Configuration ................................................................................. 37
9.9 IOR Setting .................................................................................................................. 38
9.10 Scatter Coefficient (Back Scatter) Setting ................................................................. 38
9.11 Non-reflection Threshold (Splice Loss Detecting Threshold) Setting ....................... 39
9.12 Reflection Threshold (Reflection Detecting Threshold) Setting ............................... 39
9.13 End Threshold (Optical Fiber End Detecting Threshold) Setting ............................. 39
9.14 Load Default .............................................................................................................. 40
10 Use OTDR Test FTTx-PON Network Optical Fiber Link .......................................... 40
10.1 Use PON Optimized OTDR Instrument .................................................................... 40
10.2 Select the Proper Distance Range .............................................................................. 40
10.3 End Threshold (Optical Fiber End Detecting Threshold) .......................................... 40
10.4 Test parameter recommendation value ...................................................................... 41
11 Trace Analysis and Event Operation ............................................................................. 41
11.1 Open Trace File ......................................................................................................... 41
11.2 Simultaneous Display Multi Traces ........................................................................... 42
11.3 Close Trace File ......................................................................................................... 43
11.4 Trace Display and Operating Instruction ................................................................... 43
11.5 Switch And Move Markers ........................................................................................ 44
11.6 Switch And Move the Marked Point ......................................................................... 45
11.7 Fast Move the Markers Outside the Window ............................................................ 45
11.8 Lock AB Markers ...................................................................................................... 46
11.9 Zoom the Trace .......................................................................................................... 46
11.10 Cross Frame to Zoom the Trace ............................................................................... 46
11.11 Use Zoom Toolbar to Zoom the Trace ..................................................................... 47
11.11.1 Revert the Whole Trace View ............................................................... 47
11.11.2 Zoom In Trace Horizontally ................................................................... 47
11.11.3 Zoom Out Trace Horizontally ................................................................ 47
11.11.4 Zoom In Trace Vertically ....................................................................... 47
11.11.5 Zoom out Trace Vertically ..................................................................... 48
11.12 Remember the Zoom Status Automatically ............................................................. 48
11.13 Move the Magnified Trace Window ........................................................................ 48
11.14 Operation of Event Options ..................................................................................... 49
11.14.1 Display the Event on the Trace and Locate Event In Even Sheet ....... 50
11.14.2 Add Event .............................................................................................. 51
11.14.3 Modify the Event ................................................................................... 52