SICK FX0-GMOD User Manual

1
3
2
Figure 25: Mounting the module on the DIN mounting rail
4. Slide the modules together one by one (as indicated by the arrows) until the
side
-mounted plug connector engages.
5. Mount the end pieces on the left- and right-hand sides.
Figure 26: Attaching the end pieces
Complementary information
T
he modules are interconnected via a FLEXBUS+ plug connector, which is integrated
into the housing. Before removing a module from the mounting rail, slide the modules
approx. 10mm apart.
4 MOUN
TING
50
O P E R A T I N G I N S T R U C T I O N S | Flexi Soft Modular Safety Controller 8012478/1IG6/2023-02-24 | SICK
Subject to change without notice

SICK FX0-GMOD Specifications

General

Brand	SICK
Model	FX0-GMOD
Category	Controller
Language	English