5 Electrical installation
5.1 Requirements to be met by the electrical installation
WARNING
E
lectrical voltage
There is a risk of injury from electrocution while connecting the devices.
►
Disconnect the power for the entire plant/machine.
WARNING
Unintended start of the plant/machine
The plant/machine could inadvertently start while you are connecting the devices.
►
Disconnect the power for the entire plant/machine.
WARNING
Ine
ffectiveness of the protective device due to non-compliance with safety standards
The target safety-related level may not be achieved in the event of non-compliance.
►
Observe the relevant safety standards (e.g. EN62061, or ENISO13849-1) for
all the safety-related parts of the plant (wiring, connected sensors and control
devices, configuration, external device monitoring).
ELECTRICAL INSTALLATION 5
8012478/1IG6/2023-02-24 | SICK O P E R A T I N G I N S T R U C T I O N S | Flexi Soft Modular Safety Controller
51
Subject to change without notice
To Next Page
Loading...
