Figure 34: Menu Configuration/Modbus Client
6. Enter the name, IP address and port of the MARSIC300.
Figure 35: Menu Configuration/Modbus Servers
7. Enter the address of PROFIBUS and save the settings. The address must be the
same as in the operator-side SPS.
Figure 36: Menu Configuration/PROFIBUS DP-V1
8. Click “Apply” to activate all changes.
INSTALLATION
2
8017585/YXD9/V3-1/2017-05 | SICK T E C H N I C A L I N F O R M A T I O N | MARSIC300
33
Subject to change without notice
To Next Page
Loading...
