SICK MARSIC300 User Manual

If a limit value is underflown (default setting: 60 %), the MARSIC300 switches to classi‐
fication "Maintenance request“.
Figure 92: Menu Reference energy
b
Reset: Reset reference energy
Intensity
Menu: Diagnosis/Control values/Intensity
This menu displays intensities (energies) and amplification levels of the measuring
components.
Let SICK Customer Service evaluate this information.
Figure 93: Menu Intensity
7.2
Sensor values
Menu: Diagnosis/Sensor values
This menu displays the diverse internal device sensor values:
•
Temperatures
•
Pressures
•
Flow rate
•
Cell
•
O
2
sensor
•
Emitter
•
Motors
•
Hardware
These values serve as information.
A message is output when a value is outside its nominal range.
7.3 Signals
Menu: Diagnosis/Signals
NOTE
Configuration of signals listed below: see "Data interfaces / IO", page 55 and following.
DIAGNOSIS 7
8017585/YXD9/V3-1/2017-05 | SICK T E C H N I C A L I N F O R M A T I O N | MARSIC300
63
Subject to change without notice

SICK MARSIC300 Specifications

General

Brand	SICK
Model	MARSIC300
Category	Measuring Instruments
Language	English