SICK MARSIC300

6.3 Adjustment functions
Start times
Menu: Adjustment/Parameter/Start times
This menu displays the start times of the “Cyclic triggers (CT1 .. CT16)”.
Figure 65: Menu Start times
1
Cyclic trigger name
2
Next start time
Deactivation via operator
panel or menu: Parameter/
Variables and functions/
Cyclic trigger (CTi)
Manual adjustment
Menu: Adjustment/Manual adjustment
Further information, see “MARSIC300 Operating Instructions”
Figure 66: Menu Manual adjustment
1
Measured value of this
component is set to
zero
2
Measured value of this
component is set to the
nominal concentration
of the test medium
3
Measured values of all
components listed
above are set to zero
Automatic adjustment
Menu: Adjustment/Automatic adjustment
Further information, see “MARSIC300 Operating Instructions”
Figure 67: Menu Automatic adjustment
1
Start adjustment of program displayed
6 PARAMETERIZATION
50
T E C H N I C A L I N F O R M A T I O N | MARSIC300 8017585/YXD9/V3-1/2017-05 | SICK
Subject to change without notice