SICK MARSIC300

The available programs are system-specific: see System documentation.
Parameter
6.3.1.1 Concentrations of test gases
Menu: Adjustment/Parameter/Concentrations
This menu displays the concentrations of the span gases and internal adjustment filter.
The concentrations of the test gases can be set.
Figure 68: Menu Concentrations
1
Enter the concen‐
tration of the test
medium
2
Only internal signif‐
icance
6.3.1.2 Adjustment factors
Menu: Adjustment/Parameter/Adjustment factors
This menu serves to set the correction factors (adjustment filter wheel optional).
•
The measured value is computed with both adjustment factors.
•
Factor "Internal adjust." is set automatically to "1.000" when factor "Span gas" is
changed.
•
Checkmark “Active”: This measuring component is computed.
Figure 69: Menu Adjustment factors
1
Display: Current factor
2
Input: New factor
3
Confirm: Use new factor
6.3.1.3 Start times
Menu: Adjustment/Parameter/Start times
This menu displays the start times of the "Cyclic triggers (CT1 .. CT16)“.
Figure 70: Menu Start times
1
Cyclic trigger name
2
Next start time
Deactivation via operator
panel or menu: Parameter/
Variables and functions/
Cyclic trigger (CTi)
PARAMETERIZATION 6
8017585/YXD9/V3-1/2017-05 | SICK T E C H N I C A L I N F O R M A T I O N | MARSIC300
51
Subject to change without notice